Just because there is statutory requirement for all non-domestic premises to have the right fire safety signage, there is no reason that fire exit signs cannot be used imaginatively to fit in with your building design and decoration.

Here are some examples of the different ways that a compliant fire sign can be used.

1. Wall and ceiling mounted signs are very useful when for example, space is at a premium or there is a low ceiling.

2. Sign frames can add impact to the sign message. One option is to fit the sign into the appropriate sign frame, which can be suspended or wall mounted. Alternatively, for a more design conscious solution a Vision MX frame system, which can of course be double sided.

3. Wall mounted projecting signs increase visibility from several directions.

4. Sometimes conditions require the use of an extra large sign, particularly in public places. Extended view of up to 40 metres can be achieved with signs 1200 x 400mm in size.

5. Again, constraints of design or purpose may require the use of “portrait” style fire signs, for example multi-storey car parks.

6. An innovative aid is the use of fire exit floor graphics as part of a wider safety sign installation.

7. Two larger luminaires are available, for when this type of signage is required or chosen. The cylinder range comes in various options for mounting and is an elegant solution. At a very practical level are the BSI certified metal exit signs which are extremely good value for money.

8. Photoluminescent signs are both effective and alternative choices, and can be used with several of the options available to the standard fire signs.

9. Signs for the physically impaired are part of the provision that can be required under the Disability Discrimination Act. They also show an employers awareness and sensitivity to the needs of this often overlooked section of the community.

10. “Tactual” signs are particularly relevant to the visually impaired, with the wide spaced raised text incorporating Braille. Braille signs fully conforming to BS5499-2:2002 and ISO 7010, as well as Technical Bulletin 24 of the joint Mobility Unit, part of the RNIB.

11. The Hospital Sector has developed a range of fire escape signs, specifically for the sector but have proved popular in other fields too.

12. Finally there is a range of “Standard Enhanced” signs with clear acrylic and satin chrome panel supports – a very aesthetically pleasing choice, which complements the design aware decor of an office, shop etc. All in all, a much larger selection of fire and emergency escape signs than perhaps one might have imagined. The good news is that Stocksigns can supply all the ranges listed above. Why not think seriously about how you enhance your signage.

In situations of emergency evacuation, especially when confronted by power failure, a way guidance system using photoluminescent signs and markers will help to indicate clearly defined escape routes, saving critical time for the evacuation of the building.

BS 5266-6: 1999, is a Code of Practice for non-electrical low-mounted way guidance marking using a photoluminescent system. It recommends how to plan, design, install and maintain the system when used in conjunction with powered emergency lighting. The use of this standard, combines with BS ISO 16069:2004, Graphical symbols – Safety signs – Safety way guidance systems and BS 5499-4: 2000, Code of Practice for escape route signs, gives the answers to most questions that could be asked from those contemplating installing a photoluminescent way guidance system.

The installation of a photolumiescent way guidance system does not replace the use of powered emergency lighting when this is required, but compliments its existence. For a satisfactory performance, photoluminescent materials require initial activation from a good light source.

Emergency lighting is designed to illuminate automatically the emergency escape route (i.e. staircases, landings, passageways etc.) upon failure of the supply to the normal artificial lighting. The emergency lighting must comply with BS 5266: 2005. It is vital that emergency lighting comes on if the normal lighting fails. It needs to be sufficiently bright, illuminated for enough time, and the light sources so positioned that the staff and visitors of a building can be evacuated safely in an emergency

Siting of Luminaires

Luminaires should be sited in the following positions:

  • At each exit door
  • At each intersection of corridors
  • At each change of direction
  • Close to each staircase
  • Close to any change in floor level
  • Close to fire equipment and alarm call point locations
  • At locations that adequately illuminate emergency escape and safety signs

Maintained & Non-maintained Systems.

Non-maintained systems are used in buildings with a limited occupation time, such as offices and shops, and only operate when the power fails. In general, Maintained systems are required for places of entertainment and licensed premises and can be on all the time from normal mains supply, remaining on when the power fails.

For more information contact our sales team on Tel 01737 77 40 72 or sales@stocksigns.co.uk